Cobra Project

Parts List:

AFR 165cc Cylinder Heads w/ Valve Spring Upgrade

Steeda #19 Camshaft w/ 1.7 Roller Rockers (220°/226° int./exh. Duration @ .050, .510" Lift)

Spec Stage 2 Clutch Kit (520 lb-ft torque capacity) and resurfaced flywheel

Misc. Parts:

ARP head studs, Trickflow 6.25" hardened pushrods, Felpro front and rear main seal, Timken throwout bearing and pilot bearing, FRPP water pump, Melling high volume oil pump w/ hardened driveshaft, FRPP timing chain, FRPP lifters, heavy duty motor mounts, FRPP harmonic balancer, Stant 180° thermostat, all fresh gaskets.

Teardown/Rebuild Pictures

Everything removed from the rear of the engine

Radiator, overflow tank, etc. removed

Everything infront of the heads removed

Power steering pump and a/c compressor out of the way

Upper intake manifold removed

Distributor, more coolant lines and fuel lines removed

Mess of loose wires

Water Pump and Crank Pulley Removed

Crane Cobra 1.7 Roller Rockers

Roller rockers and pushrods removed

Heads removed

Harmonic balancer, front cover and timing chain removed

Lifters removed

Camshaft removed

Bare short block

New camshaft installed

Mellings high-volume oil pump

AFR 165cc Cylinder Heads

New FRPP roller lifters

Ford Racing double timing chain

Front cover and new FRPP water pump

Smog holes pluged

Resurfaced flywheel

Spec Stage 2 kevlar clutch disc

Updated May 22nd, 2007